We’re now ready to assemble the external
indicator as well as the rope clamp. We’ll have to adjust the rope level as well. Pulling the indicator through the rope, measure off a level that’s approximately an inch to an inch and a half below the bottom of the roller elbow. Now assemble the rope clamp to the visual indicator. Using a philips screwdrivers we’ll open up the clamp itself. And we’ll take two pieces of the rope and we’ll clamp them inside. Okay with our external indicator now installed, we’re ready to install the external
balanced older red install the external clear pipe. The one thing we want to make sure
beforehand is that the rope is running smoothly on the pulleys themselves. Just give it a good tug a couple of
times and make sure everything is fine. Once we’ve got that your pipe simply slips right inside and our reverse flow is installed.